GPS Geodetik Hi-Target V30 GNSS RTK System

Hi-Target V30 GNSS RTK System
The V30 GNSS RTK system is a well-received product for its good quality and competitive price. Made of General Electric Xenoy 5220U polymer resin, this product can be used in the environment with harsh field conditions. Additionally, to ensure the optimal capacity of positioning, the internal of the product is specially designed to reduce or even avoid the effect caused by obstruction or multipath.
For easy maintenance and simple operation, this V30 GNSS RTK system is provided with modular design. So, it is much easier for users to install or exchange UHF radio. Particularly, other UHF radio module can also be installed on this machine for special purpose.

Product Features
Full Automatic Operation
A smart speaker is particularly designed for this machine to offer guidance for users during operation. The operation of the product is very simple. There is no need for you to set up parameters for each operation. For example, you can press the button to have the setting-up done automatically. With this product, field work can be finished conveniently.
Multi Satellite Constellation Tracking
This V30 GNSS RTK system is provided with 220 channels. It is fully compatible with GNSS satellite constellations to track GLONASS, GALILEO, BDS, SBAS, GPS, etc.
High Power UHF Radio Transceiver
In the same receiver, the working mode is switchable between the base and the rover because of the UHF radio transceiver. There are 2 watts HI-TARGET internal UHF radio and 1 watt Pacific Crest TrimTalk© internal UHF radios for your selection, which are used for UHF RTK operation and to enable the product to work in conjunction with the receivers of other brand with Trim Talk© compatible radios, respectively.
Seamlessly Operation under CORS System
Internally designed with GPRS or 3G modem, the V30 GNSS RTK system can operate with the correction from CORS networks in CMR or RTCM. Importantly, messages are needless to be interpreted and can be read seamlessly.
Long-life Battery
This product is powered by 4400mAh Li-Ion battery with the static working time of 13-15hours. Meanwhile, the battery working time of RTK rover (UHF/GPRS/3G) is 10-12 hours and 8-10 hours for RTK base.
Good Enclosure Protection
The enclosure protection conforms to IP67 standard. The flexible flat cables are well protected with good resistance to 3m natural drop onto concrete. Even under impact or vibration, customers can use the product freely.
Field Controller and Software
The controllers and software for the V30 GNSS RTK system are optional. Besides the standard field & software manufactured by HI-TARGET, the controller with OS Microsoft Windows Mobile 6.5 is also compatible with the software of the third party like Carlson SurvCE, MicroSurvey FieldGenius, Digiterra Explorer, ERI ArcPad, etc. Configured with Wi-Fi, Bluetooth, and GPRS/3G, the HI-TARGET controller can be connected with other device, server or can collect data without any wire simultaneously and seamlessly.
Post-processing Software
The HI-TARGET Geomatics Office (HGO) software can provide GNSS solution with a complete suite of programs to support GNSS receivers. Therefore, the standard RINEX data and the raw data can be easily and flexibly processed.

Performance
1. Measurement with High Accuracy
The V30 GNSS RTK system is manufactured based on the Pacific Crest Maxwell 6 Custom Survey GNSS technology and the Proven Pacific Crest low evaluation technology. The multiple correlator with high precision realizes the GNSS pseudo range measurements. With the unfiltered, unsmoothed pseudo range measurements data, the low noise, low multipath error, low time domain correction, as well as high dynamic response are all realized. With 1Hz bandwidth, the measurement precision of the GNSS carrier phase is less than 1mm. The signal-to-noise of the V30 GNSS RTK system is reported in dB-Hz
2. Satellite Signals Tracked Simultaneously
GPS: L1C/A, L2C, L2E, L5
GLONASS: L1C/A, L1P, L2C/A (for GLONASS M only), L2P
SBAS: L1 C/A, L5
Galileo: L1 BOC, E5A, E5B, E5AltBOCⅰ
BDS/Compass (optional): B1, B2ⅱ
QZSS: L1 C/A, L1 SAIF, L2C, L5
3. Positioning Performance
1) Static and rapid static GNSS Surveying
Horizontal: 2.5mm+0.5ppm RMS
Vertical: 5mm+0.5ppm RMS
2) Post Processing Kinematic Surveying
(PPK/Stop & Start) GNSS Surveying
Horizontal: 1cm+1ppm RMS
Vertical: 2.5cm+1ppm RMS
Initializing time: generally 10 minutes for base and 5 minutes for rover
Initializing reliability: typically>99.9%
3) Real-time Kinematic(RTK) Surveying
Horizontal: 8mm+1ppm RMS
Vertical: 15mm+1ppm RMS
Initializing time: typically<8 p="" seconds=""> Initializing reliability: typically > 99.9%
4) Code Differential GNSS Positioning
Horizontal: 25cm+1ppm RMS
Vertical: 50cm+1ppm RMS
SBAS : 0.50m Horizontal, 0.85m Vertical

Hardware Specifications
Physical Performance
Dimensions (W×H): 19.50cm×10.40cm (7.68 in×4.09 in)
Weight:1.3kg (2.86lb) with battery inserted, internal radio, standard UHF antenna
Operating temperature:-45℃ to +65℃ (-49℉ to +149℉)
Storage temperature: 55℃ to +85℃ (-67℉ to +185℉)
Humidity:100%
Waterproof/dustproof:IP67 standard, temporary immersion to depth of 1m is available (3.28ft).
Shock and vibration resistance:Anti-3m natural drop onto concrete
Electric Performance
External input power:6V to 28V DC
Power consumption:2.5W
Internal rechargeable battery:7.4V 4400mAh Lithium-Ion battery (the internal power and the external power can be switched automatically).
Internal batteries life
Static working: 13-15 hours
RTK Rover (UHF/GPRS/3G):10-12 hours
RTK Base: 8-10 hours
I/O interface
1×Bluetooth
1×standard USB2.0 port
2×RS232 serial port
2×DC power input (8-pin & 5-pin)

Communication and Data Storage
GPRS/GSM or 3G
GPRS/GSM or 3G: Included
Network RTK (via CORS) Range: 20-50km
HI-TARGET Iinternal UHF Radio (standard)
Frequency: 460 MHz with 116 channels
Transmitting Power: Adjustable among 0.1W, 1W, 2W
Transmitting Speed: Up to 19.2Kbps
Working Range: General 3-5km, 8-10km optimal
Pacific Crest ADL Foundation Internal UHF Radio
Frequency: 390~430 MHz or 430~470 MHz
Transmitting Power: Adjustable among 0.1W, 0.5W, 1W
Transmitting Speed:Up to 19.2Kbps
Radio Communication Protocol: Most of the protocols are supported.
Working Range: Typical 3-5km, 8-10km optimal
HI-TARGET External UHF Radio (standard)
Frequency: 460 MHz with 116 channels
Transmitting Power: Adjustable amount 5W, 10W, 20W, 30W
Transmitting Speed: Up to 19.2Kbps
Working Range: 8-10km typical, 15-20km optimal
Pacific Crest ADL Vantage Pro External UHF Radio
Frequency: 390-430 MHz or 430-470 MHz
Transmitting Power: Adjustable from 4W to 35W
Transmitting Speed: Up to 19.2Kbps
Radio Communication protocol: Most of the protocols are supported.
Working Range: Typical 8-10km, 15-20km optimal
Other External Communication Device Supported
GSM modem
Data Storage
Internal Memory: 64MB
Data Formats (From 1Hz positioning output up to 50Hz)
CMR: sCMRx, CMR, CMR input and output
RTCM: RTCM 2.1, 2.2, 2.3, 3.0, 3.1 input and output
Navigation Outputs ASCII: NMEA-0183 GSV, AVR, RMC, HDT, VGK, VHD, ROT, GGK, GGA, GSA, ZDA, VTG, GST, PJT, PJK, BPQ, GLL, GRS, GBS
Navigation Outputs Binary: GSOF
Impulse Frequency: 1 Pulse/s Output